| |
| | |
home
>
internet-enabling
>
tcp/ip
> tcp/ip stacks, resources
| |

You've measured the jitter, now how do you fix it?
While making accurate measurements is important, you need to identify the root causes of jitter problems before you can minimize them.
Keys to success include understanding how to best use your jitter analysis tool, plus how jitter propagates in a communications system.
Find out more
here
!

| |
-
tcp/ip stack
-
ejip - Embedded Java TCP/IP
ejip is a minimal TCP/IP stack written from ground up in Java.
The main purpose of ejip is for the use in embedded applications.
It currently runs on JOP, but can be used with a small JOP emulation layer under standard Java runtime (with javax.comm for Slip or Ppp). Following protocols are implemented: Slip, PPP CS8900 driver ARP ICMP IP UDP TFTP TCP (just for one HTTP request) HTTP May 15, 2003: changed Html.ja...
preview:
http://www.jopdesign.com
-
tcp/ip stack
-
lwIP - A Lightweight TCP/IP stack
This project is not part of the GNU Project.
lwIP is a small independent implementation of the TCP/IP protocol suite that has been developed by Adam Dunkels at the Computer and Networks Architectures (CNA) lab at the Swedish Institute of Computer Science (SICS).
preview:
http://savannah.nongnu.org
-
tcp/ip stack
-
NAT for lwIP
NAT for lwIP is a simple open source implementation that allows small lwIP enabled devices to create a private network which share a single connection to an external network such as the Internet.
Since the local IP addresses used in the private network are invalid in the external network, NAT multiplex the traffic from the private network and present it to the external network as if it was coming from a single device having only one IP...
preview:
http://www.sm.luth.se
-
tcp/ip stack
-
uIP TCP/IP Stack for Embedded Microcontrollers
uIP is an implementation of the TCP/IP protocol stack intended for small 8-bit and 16-bit microcontrollers.
It provides the necessary protocols for Internet communication, with a very small code footprint and RAM requirements - the uIP code size is on the order of a few kilobytes and RAM usage is on the order of a few hundred bytes.
preview:
http://www.sics.se
-
resource
-
Beyond Logic
Resource for topics such as USB, TCP/IP, and Embedded Linux.
Very detailed and useful.
preview:
http://www.beyondlogic.org
-
resource
-
Practical TCP/IP Sockets in C
Welcome to the web resource for TCP/IP Sockets in C: Practical Guide for Programmers.
preview:
http://cs.baylor.edu
-
resource
-
Uri's TCP/IP Resources List
This FAQ contains a list of various resources (books, web sites, FAQS, newsgroups, and useful net techniques) intended to help a newbie to learn about the TCP/IP suite of protocols.
preview:
http://www.private.org.il
 |

| 
| 
Express Logic develops, markets and supports the ThreadX® real-time operating system (RTOS), NetX TCP/IP networking stack, USBX USB stack, and FileX® embedded file system for embedded applications.
ThreadX is a royalty-free, full source code, small-footprint, low-overhead RTOS that is extremely easy to learn and use. ThreadX is one of the most widely deployed RTOS products in the world, with over 450 million products based on ThreadX.
 | 
| 
|
|
|
| |