70% Savings on Blackfin Processor Development Tools
For a limited time, you can purchase a Blackfin development tools bundle at a 70% savings. The bundle includes VisualDSP++ Development Software for Blackfin and the High Performance USB-based Emulator. Click here for purchasing details.

Virtualization - FREE White Paper Download

sbc    

Fast-UXGA Frame Grabber Series
The Fast-UXGA frame grabber series is for users who anticipate a demand for extreme I/O requirements or higher bandwidth, complex image processing and real-time fast storage in a cost effective platform. The base Fast-UXGA, is a raw-length PCI board with two (four-mixed) UXGA analog conversion channels using Analog Device's AD9888. The front end data is formatted and preprocessed by a FPGA before being sent to the memory subsection, processor, GigE interfaces or other outputs. Finally, the Fast-UXGA interfaces to the host computer through a PCI-X or 4x PCIe interface for state-of-the-art data acquisition. Options include the addition of multiple (8) Serial ATA (SATA) 150 MB/sec interfaces for continuous high-speed data storage without the usual OS or host bus transfer delays.
preview: http://www.alacron.com  

sbc    

Fast-X-PCIe PCI Express Boards
The base Fast-X, is a one-half raw-length PCI board with four GigE ports and/or three basic 85 MHz Camera Link Channels and more which provide input for the newest cameras as well as a header for adaptation of other high speed interfaces. The Fast-Xe frame grabber series is for users who anticipate a demand for extreme I/O requirements or higher bandwidth, complex image processing and real-time fast storage in a cost effective platform. The base Fast-X, is a one-half raw-length PCI board with four GigE ports and/or three basic 85 MHz Camera Link Channels and more which provide input for the newest cameras as well as a header for adaptation of other high speed interfaces.
preview: http://www.alacron.com  

sbc    

FastFrame-CB PCMCIA Board
Alacron introduces the FastFrame-CB. Available in both analog, digital and camera link configurations for greater flexibility and cost savings. The FastFrame-CB uses the Nexperia (formerly TriMedia) PNX1302 microprocessor from Philips Semiconductors.
preview: http://www.alacron.com  

sbc    

FastImage 1303 PCI Board
FastImage1303 is an Autonomous Imaging System (AIS) that offers a balanced architecture of flexible I/O and processing power with computational and memory bandwidth, typically required by demanding, real-time imaging, vision, and DSP applications. And FastImage1303 is based on the TriMedia TM1302 microprocessor from Philips Semiconductors.
preview: http://www.alacron.com  

sbc    

X3-25M
PCI Express XMC Module - (2) 105 MSPS A/Ds, (2) 50 MSPS D/As, Spartan 3A DSP 1.8M FPGA. The X3-25M is an XMC IO module featuring two 16-bit, 105 MSPS A/D channels and two 16-bit, 50 MSPS DAC channels designed for high speed stimulus-response, ultrasound, and servo control applications. Flexible trigger methods include counted frames, software triggering and external triggering. The sample rate clock is either an external clock or on-board programmable PLL clock source.
preview: http://www.innovative-dsp.com