| |
| |
home
>
fpga
>
fpga
> webinars a-a
more
1
2
3
4
5
6
7
8
9
| |

Mentor Graphics
View Technical Publication Library

| |
-
webinar
-
Altera Stratix II GX Design Kit for HyperLynx with PELE support
In this 1-hour webcast we will explore how the Altera Stratix II GX Design Kit for HyperLynx can be used to design a robust SERDES channel.
We will cover S-parameter extraction from HyperLynx and how to use that S-parameter in Altera?s PELE tool to determine approximate pre-emphasis and equalization settings for the Stratix II GX tranceivers.
Those settings can then be automatically applied in the model configurator for easy model setup and...
preview:
http://www.mentor.com
date: 6/13/2007
-
webinar
-
How to Get More Simulation Runs on Your Design.
Saving Time Through ...
Most FPGA vendors offer an OEM version of ModelSim.
This enables a low-cost avenue for new comers to get moving in FPGA design.
However, as designs become more complex, this OEM ModelSim will quickly run out of gas. In this seminar we will introduce the full ModelSim product line.
We will show how raw simulator performance can dramatically increase the amount of simulation cycles a designer can simulate.
We will also discuss specific...
preview:
http://www.mentor.com
date: 1/7/2008
 |
-
webinar
 -
Optimizing FPGA / PCB Integration to Maximize System Performance
As FPGA density and I/O pin counts continue to increase, it becomes imperative for FPGA, System, and PCB designers to work together.
Only as a team, can design time and production costs be minimized and maximum system performance achieved.
No longer can companies focus solely on FPGA design goals while disregarding the issues that pin assignments create for PCB routing and performance.
Conversely, companies cannot focus solely on PCB...
preview:
http://www.mentor.com
date: 10/2/2008
-
webinar
-
Achieve Breakthrough Embedded Performance with the New PowerPC® Processing Block Architecture
The new Virtex®-5 FXT family of Xilinx FPGAs was developed specifically to enable integration of sophisticated embedded systems on a single, flexible and high performance platform.
In this webcast, Xilinx will introduce the high system performance and bandwidth advantages of the innovative PowerPC 440 blocks embedded in the new Virtex-5 FXT platform FPGAs.
We will show how to build customized embedded systems to unique and exacting design...
preview:
http://seminar2.techonline.com
date: 5/21/2008
-
webinar
-
Addressing Size, Weight, and Power Constraints in Military and Aerospace Applications
The military community is transforming the battlefield of the 21st century.
From satellite to soldier, reducing system size, weight, and power (SWaP) are critical.
Whether in manned (ships, aircraft, and vehicles) or unmanned (radar, missiles, sensors, air, and ground vehicles) equipment, reducing SWaP constraints is paramount to building deployable platforms and to adding functionality and increasing performance in existing chassis.
Durin...
preview:
http://www.altera.com
date: 8/16/2007
-
webinar
 -
Altera and Aldec: Better Verification with High-Reliability DO-254 Compliance Verification Toolset
Today's DO-254 Challenge: Verifying the entire FPGA design in hardware while tracing the output results back to the original design requirements (section 6.2 of specification) is a challenge with today's DO-254 level A & B verification solutions.
View this webinar to learn: How to use a world-class HDL simulation tool suite with an in-hardware simulation system that supports your Altera® FPGA and HardCopy® ASIC target devices How to...
preview:
http://www.altera.com
date: 9/24/2008
more
1
2
3
4
5
6
7
8
9
 |

| 
| 
Express Logic develops, markets and supports the ThreadX® real-time operating system (RTOS), NetX TCP/IP networking stack, USBX USB stack, and FileX® embedded file system for embedded applications.
ThreadX is a royalty-free, full source code, small-footprint, low-overhead RTOS that is extremely easy to learn and use. ThreadX is one of the most widely deployed RTOS products in the world, with over 450 million products based on ThreadX.
 | 
| 
|
|
|
| |