 
Industry standard COM Express CPU module and dual XMC modules
Innovative Integration is a leader in signal processing and data acquisition hardware and software.
Our products combine DSPs and FPGAs with high performance analog, ready for integration into demanding real-time applications such as wireless, medical, and military.
| |
-
article
-
Building an FPGA-based solution for industrial wireless sensor networks
With the introduction of wireless field-side standards WirelessHART and SP100.11a, gateway implementers must make difficult trade-offs between the cost of a solution and the requirement for it to communicate with the plant over multiple Industrial Ethernet standards.
With more intelligence moving into networked/gateway units, designers need reliable, proven solutions as building blocks for successful implementations in the evolving standards...
preview:
http://www.industrial-embedded.com
date: 1/27/2010
|
-
article
-
Design techniques for FPGA power optimization
A variety of factors – from the micro to the macro, from conserving battery life to lessening global warming – has pushed power conservation rapidly up the list of system designers’ concerns.
Engineers have ranked power consumption first in recent surveys on key design priorities or as a close second next to performance, density, and cost.
preview:
http://www.dsp-fpga.com
date: 6/18/2009
|
| |
-
article
-
Developers throttle the bottleneck to grab maximum I/O bandwidth using FMCs
Recent months have seen momentum growing in the defense and aerospace market for the new FPGA Mezzanine Card (FMC) standard.
FMC (ANSI/VITA 57) modules support the multi-GHz signal acquisition rates required to fully exploit the processing performance and I/O bandwidth delivered by the newest generation of FPGA devices used in demanding military applications such as Electronic Counter Measures (ECM), where high-bandwidth data input,...
preview:
http://www.dsp-fpga.com
date: 6/18/2009
|
-
article
-
Eye of the beholder: FPGAs convert CMOS imager output to human-viewable RGB
Paul describes using the Altera Cyclone III FPGA in an application to render a CMOS imager’s output human-viewable.
preview:
http://www.dsp-fpga.com
date: 5/18/2009
|
-
article
-
FMC modules deliver high-speed I/O from ADCs to FPGAs
Some MCs in the entertainment world do better than others at communicating with many different kinds of audiences.
Now it turns out that “MCs” in the reconfigurable embedded computing world are not all equal either, as Mark points out here, comparing PMCs XMCs, and FMCs with regard to handling I/O interfaces, power, cooling, noise isolation, and other issues.
preview:
http://www.dsp-fpga.com
date: 8/19/2009
|
 more
1
2
3
4
5
 |
