Introducing the FireCracker!
Based on Analog Devices popular Blackfin embedded processor, Silica has developed the FireCracker Development and Reference Design Platform for audio and video applications. FireCracker is a unique concept of a hybrid between a development board and a reference design that enables design engineers to bring embedded computing solutions from concept to production in record time.

Got Talent? Need Talent? Find or list design services now!

sbc    

Fast-UXGA Frame Grabber Series
The Fast-UXGA frame grabber series is for users who anticipate a demand for extreme I/O requirements or higher bandwidth, complex image processing and real-time fast storage in a cost effective platform. The base Fast-UXGA, is a raw-length PCI board with two (four-mixed) UXGA analog conversion channels using Analog Device's AD9888. The front end data is formatted and preprocessed by a FPGA before being sent to the memory subsection, processor, GigE interfaces or other outputs. Finally, the Fast-UXGA interfaces to the host computer through a PCI-X or 4x PCIe interface for state-of-the-art data acquisition. Options include the addition of multiple (8) Serial ATA (SATA) 150 MB/sec interfaces for continuous high-speed data storage without the usual OS or host bus transfer delays.
preview: http://www.alacron.com  

sbc    

FastFrame-CB PCMCIA Board
Alacron introduces the FastFrame-CB. Available in both analog, digital and camera link configurations for greater flexibility and cost savings. The FastFrame-CB uses the Nexperia (formerly TriMedia) PNX1302 microprocessor from Philips Semiconductors.
preview: http://www.alacron.com  

sbc    

X3-25M
PCI Express XMC Module - (2) 105 MSPS A/Ds, (2) 50 MSPS D/As, Spartan 3A DSP 1.8M FPGA. The X3-25M is an XMC IO module featuring two 16-bit, 105 MSPS A/D channels and two 16-bit, 50 MSPS DAC channels designed for high speed stimulus-response, ultrasound, and servo control applications. Flexible trigger methods include counted frames, software triggering and external triggering. The sample rate clock is either an external clock or on-board programmable PLL clock source.
preview: http://www.innovative-dsp.com  

sbc    

X5-210M
The X5-210M is an XMC IO module featuring four 14-bit 250 MSPS A/Ds with a Virtex5 FPGA computing core, DRAM and SRAM memory, and eight lane PCI Express host interface. A Xilinx Virtex5 SX95T with 512MB DDR2 DRAM and 4MB QDR-II memory provide a very high performance DSP core for demanding applications such as emerging wireless standards. The close integration of the analog IO, memory and host interface with the FPGA enables real-time signal processing at extremely high rates exceeding 300 GMACs per second.
preview: http://www.innovative-dsp.com  

tutorial    

Basic Analog Circuits
This interactive tutorial introduces and explains the fundamentals of analog circuits. It covers analog circuit concepts explaining Ohm’s law, capacitance calculations, inductance calculations, series and parallel configurations for capacitance and inductance and also RC filters.
preview: https://sine.ni.com  

tutorial    

Dr. R. David Middlebrook Analog Tutorial & Online Course
Two professors, Don Peter at Seattle Pacific U and Arthur Witulski, then at the U of Arizona Tucson, pressed me to conduct an Analog Workshop for instructors to consider the question 'Could, and Should, the D-OA approach be adopted in a first-level circuits course?' The outcome was unanimously positive, as was that of a second workshop conducted a year later. Spearheaded by Marcelo Simoes, a professor at the Colorado School of Mines, Don...
preview: http://www.ardem.com